• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 1949 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Error connecting to the target, Error 0x80000200/-140

steve anderson
Prodigy 70 points

Other Parts Discussed in Thread: TMS320F2812

Using:

Code Composer Studio Core Edition  Version: 4.2.4.00033

Spectrum Digital XDS510LC USB emulator

Spectrum Digital eZdsp TMS320F2812

Target Configuration:

Connection: Spectrum Digital XDS510USB Emulator

Board or device: I've tried both "TMS320F2812" and "EZDSPF2812"

When I attempt to "Connect Target" I get:

Error connecting to the target:
Error 0x80000200/-140
Fatal Error during: OCS,
Error generated by SD scan controller module


  • 0
    Prodigy 80 points

    hi...

    I got the same error, then what i observed is, there is connectivity issue b/w JTAG pins & micro-controller programming pins include Vcc and Gnd  . after solving connectivity issue then programming is done. check the connectivity  which is proper or not. and ensure the target configurations before programming.

    regards

    Shiva Prasad E