PAN1323 Bluetooth Evaluation Module Kit

Burak DERYA

Other Parts Discussed in Thread: CONTROLSUITE

Hello,

I need to communicate with bluetooth module which is called PAN1323 Bluettoth Evaulation Module Kit. i could not find library about F28M3 Concerto controlCARD. Can you help me about my issue. By the way i am new about ti modules.

Thank you for your concern.

over 13 years ago

0 Trey German289 over 13 years ago

TI__Mastermind 22025 points

Burak,

We currently do not have software for this module, but I believe there is example code for the Stellaris devices in their Stellarisware package. I would recommend you download that and look at the examples in there as a starting point. The M3 half of Concerto is very similar to the Stellaris devices, so the software should port very easily.

As far as hardware goes, what type of module do you have? Is it the bare PAN1323 or is it mounted on a blue board with two connectors on the back side? If its mounted on the blue board, there is an adapter that exists that will allow you to plug it into the controlCARD, but they are not for sale. If you are interested I can try to work to get you one.

Trey

0 Burak DERYA over 13 years ago in reply to Trey German289

Expert 1175 points

I have the board which is at the link. https://estore.ti.com/PAN1323EMK-PAN1323-Bluetooth-Evaluation-Module-Kit-P2702.aspx

Is not there any way to communicate with bluetooth with a module whic is different from pan1323.

0 Trey German289 over 13 years ago in reply to Burak DERYA

TI__Mastermind 22025 points

You can definitely communicate with this module using the Concerto device, we just don't have the software readily available in controlSUITE. You will have to port the software from what is offered by the Stellaris team.

Take a look here:

ti.com/stellarisware

C2000™︎ microcontrollers

C2000 microcontrollers forum

PAN1323 Bluetooth Evaluation Module Kit