CAN Stack for Piccolo TMS320F28069

Hemanth Sundaresh

Other Parts Discussed in Thread: TMS320F28069

Hello ,

Are there any vendors who support complete CAN stack (either AUTOSAR/ Non-AUTOSAR) in Piccolo TMS320F28069?

In the C2000 Software section I got one line to vendor
http://www.ti.com/lsds/ti/microcontroller/32-bit_c2000/tools_software.page#can

But looks like they support only CAN driver not the complete stack.

regards,

Hemanth

over 11 years ago

0 Gautam Iyer over 11 years ago

Guru 192875 points

Hi Hemanth,

Any plans to use Matlab for this?

Check this out: http://www.mathworks.in/products/embedded-coder/

Regards,

Gautam

0 ChrisClearman over 11 years ago

TI__Guru** 119450 points

the Simma Software link from our website you linked is our recommended vendor. They do offer a complete stack and are used by production customers.

Port is another vendor from Europe who we also recommend.

0 Patrick Browne over 11 years ago

Prodigy 30 points

Hemanth

At Simma Software, we likely have the software solutions that you are looking for. In addition to the CAN device driver for your Piccolo part, we have the higher level protocols available such as J1939, CANopen, and ISO15765. The products in our software library are Non-AUTOSAR.

Perhaps it is possible for you to contact us directly? We are located in the United States, and the phone number is: 812-418-0526

We welcome the chance to further the conversation.

Best,

Patrick Browne, Director of Business Development

0 Hemanth Sundaresh over 11 years ago in reply to ChrisClearman

Intellectual 380 points

@Gautam: I need some vendor who delivers a complete communication stack for CAN.

@Chris: Thanks for the info

@Patrick: I will contact you.

C2000™︎ microcontrollers

C2000 microcontrollers forum

CAN Stack for Piccolo TMS320F28069