Running a TMS320F28016 from sci

Gerhard Schaden

Other Parts Discussed in Thread: TMS320F28016

I want to boot the TMS320F28016 DSP from sci. I have embedded linux arm system, which should sent the firmware to the dsp, on boot. Is this possible?

-Gerhard

over 9 years ago

0 Katie Pier over 9 years ago

TI__Guru 68116 points

Hi Gerhard,

I think this is a question about a C2000 device, not an MSP430, so I have moved the thread to the C2000 forum. http://e2e.ti.com/support/microcontrollers/c2000/f/171.aspx

Regards,

Katie

0 Mark Labbato over 9 years ago

Guru 30330 points

Gerhard,

Yes, this is possible. Please read the User Guide for the F280x Boot ROM SPRU722.

Thanks,

Mark

0 Gerhard Schaden over 9 years ago in reply to Mark Labbato

Prodigy 30 points

Thank you,

in theory that's good, but I have no clue how to do that.

currently I have a "TMS320-P28016.out" file, could you explain how to use the hex2000 tool to generate the hex file. Do I also need a special loader or is it ok to send the hex date via the serial line?

-Gerhard

0 Gerhard Schaden over 8 years ago in reply to Gerhard Schaden

Prodigy 30 points

I still have this issue.

Can someone guide me to some documentation how to get from an out file to something I can send over the serial line.

-Gerhard

C2000™︎ microcontrollers

C2000 microcontrollers forum

Running a TMS320F28016 from sci