This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
My question is to know the value of the internal pullup reisitors on the GPIO pins? I can not find it neither in the ddatasheet nor in the Reference Manual.
Tahnks for your help!
From page 150 of the datasheet for the F28069M, we implement the internal pullup resistors for the GPIO pins with the following model:
Additionally, the electrical characteristics for a GPIO pin with the pullup resistor enabled can be found in the table below (also from the same datasheet on page 20)
Let us know if this answers your question or if you have any follow up questions.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
In reply to Kyle Cousino:
Thanks for your help! I did not see this schematics.
Thank you one more time for taking the time to answer my question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.