This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TMS320F28333: F28333 load fail using Uniflash and CCS6.1

Intellectual 2630 points

Replies: 3

Views: 144

Part Number: TMS320F28333

Hi C2000 Champion

My customer use 100MZ F28232/F28335 for servo control, both work fine and servo control no problem.

Then the F28335 is replaced by F28333, as you know it is pin to pin and software compatible  with F28335.

But F28333 can not be programmed through uniflash and CCS. the fail report as below:

Uniflash version is v4.1.0.

CCS is 6.1  and update to get F28333 device support.

VDD is 1.8V.

I used the flash_f28335 example to load to F28333, load fail too.

Please help to look at this problem, as customer want to MP soon.

  • Eric,

    it appears like the customer may still be using the F28335 Target configuration when attempting to program the f28333. They will likely have to updated their CCS, because the support files for the F28333 were just released. Please ensure they are using the correct Target configuration. If they are still having problems after updating there ccxml, please let me know.

    Regards,
    Cody

  • In reply to Cody Watkins:

    H Cody
    The issue still happen, let's discuss in email.
  • In reply to Eric Ma:

    Hi All
    close the issue offline, after update the flash algorithm interface.out file.
    ERIC

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.