Starterware/TMS320F28069: Stand alone Boot loader

ruediger.gerfried

Intellectual 880 points

Part Number: TMS320F28069
Other Parts Discussed in Thread: C2000WARE

Tool/software: Starterware

Hello Hotline,

I will start the Serial Bootloader past Reset device with GPIO37=L and GPIO34=H -> SCI- Boot mode

The Command

C:\Software\serial_flash_programmer.exe -d f2806x -k f28069_flash_kernel.txt -a BA_CTRL_PMSM_V52_Ecc_1_Flash.txt -p COM3 -b 9600

brings the following window

and then no progress.

I look in th window no f28069_flash_kernel.txt

What must I do for correct Operation?

Regards

Gerfried

over 6 years ago

0 Sal Pezzino over 6 years ago

TI__Mastermind 32995 points

Please try with -v for verbose printing. Please see App Note: www.ti.com/lit/sprabv4

Make sure your board is configured properly to enable SCI communication. Please test this using a simple sci echoback example in C2000Ware.

sal

0 ruediger.gerfried over 6 years ago in reply to Sal Pezzino

Intellectual 880 points

Hello Sal,

Thank your for your quick answer.

I think my board is configured properly: befor I start the serial_bootloader.exe, I have testing with Hyperterminal: I send A or a und becomes A or a return -> for me communication ok...

I will test now the newer Version of serial_bootloader in C2000Ware...

Regards

Gerfried

0 Sal Pezzino over 6 years ago in reply to ruediger.gerfried

TI__Mastermind 32995 points

OK. yes it seems it is working properly.

Please also run with -v verbose which should provide some more printed information.

sal

C2000™︎ microcontrollers

C2000 microcontrollers forum

Starterware/TMS320F28069: Stand alone Boot loader