RTOS/TMS320F28027F: TIDM 1003 and the emulator

K.V. Rao

Part Number: TMS320F28027F
Other Parts Discussed in Thread: TMDSEMU110-U, MOTORWARE,

Tool/software: TI-RTOS

Hi,

I have ordered for TMDSEMU100v2U-20T @ TI stores and its cancelled because the said emulator is outdated. Instead they have recommeded TMDSEMU110-U emulator.

Would like to know if the suggested emulator could be used on TIDM 1003 for execution of motorware code (i.e., FOC and BLDC)

Please suggest.

thx & rgds

KVRao

Ref design doc sec 3.1.1. states :- The XDS100v2 JTAG connection allows for programming and debugging of the TMS320F28027F controller.

over 6 years ago

0 Yanming Luo over 6 years ago

TI__Guru** 109810 points

Both are ok for this design, but you need to make a convertor to connect the emulator with the design board based its schematic.

0 K.V. Rao over 6 years ago in reply to Yanming Luo

Intellectual 610 points

Thanks yanming for your immediate response. Would buy the same and revert back for further assistance.

Rgds

Kvrao

0 K.V. Rao over 6 years ago in reply to Yanming Luo

Intellectual 610 points

Could you confirm if it works with free license of code composer studio 7.
Thx

C2000™︎ microcontrollers

C2000 microcontrollers forum

RTOS/TMS320F28027F: TIDM 1003 and the emulator