• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 82 subscribers
  • Views 1104 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320F28377D: EPWMSYNCINSEL register selections, 14.14.2.3 in SPRUHM8G Table 14-18

Susan Beiter78
Intellectual 660 points
Part Number: TMS320F28377D


I am looking for information on how to set the EPWMSYNCINSEL register to choose the source of EPWMxSYNCIN.  The table has +1722 where the descriptions of the SEL 4:0 bitfield should be, and I tried searching the document for a description of the mux choices, but couldn't find it.  Page is attached.  Thanks! 

page_1771_epwmsyncinsel.pdf

  • 0
    TI__Genius 15260 points

    Hi Susan,

    This register is not actually applicable this device and is marked for removal in the next release. It appeared due to an error in the document preparation flow. We apologize for the confusion on this.

    The registers you will want to look at can be seen in the figure titled "Time-Base Counter Synchronization Scheme". The register name is SYNC_SOC_REGS[SYNCSELECT].

    Thank you for choosing TI, and please let us know if we can provide additional assistance.

    Regards,

    Kris

  • 0 in reply to Kris Parrent
    Intellectual 660 points

    ok, thanks.  I thought it was strange since the register didn't appear in the previous rev spruhm8f of the doc.