LAUNCHXL-F28377S: Stand alone app. GUI v2

Dariusz Swierczynski

Intellectual 320 points

Part Number: LAUNCHXL-F28377S

Hi,

In my system I generate sinusoidal signal with period 0-20ms.

I would like to see it on GUI Application.

Actually I can observe any sinusidal signals but some distorted waveforms.

Let me know. There is possible to update more frequently those signals in order to see sinusoidal.

Best regards

over 5 years ago

0 Richard Poley over 5 years ago

TI__Mastermind 27200 points

Please can you clarify which GUI you are referring to?

Also, please confirm the period range: 0ms period corresponds to an infinitely high frequency.

Regards,

Richard

0 Dariusz Swierczynski over 5 years ago in reply to Richard Poley

Intellectual 320 points

GUI v2
Period from 1s to 20ms

0 Mark Labbato over 5 years ago in reply to Dariusz Swierczynski

Guru 30330 points

Hi there,

Are you referring to GUI Composer?

-Mark

0 AartiG over 5 years ago

TI__Guru**** 173310 points

user4700872 said:

In my system I generate sinusoidal signal with period 0-20ms.

I would like to see it on GUI Application.

Actually I can observe any sinusidal signals but some distorted waveforms.

Are you storing the sine wave data points into an array and using the GUI Composer Line Graph to plot the array?

Could you show a picture of what the GUI application currently looks like (in comparison to what you were expecting)?

0 AartiG over 5 years ago in reply to AartiG

TI__Guru**** 173310 points

Since we haven’t heard back from you, we are assuming you were able to move past this issue and will be closing this thread. If the issue is not resolved, post a reply below with the requested details or start a new thread. Thanks!

C2000™︎ microcontrollers

C2000 microcontrollers forum

LAUNCHXL-F28377S: Stand alone app. GUI v2