This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

CCS/TMS320F28379D: Embedded coder support for TMS320F28379D in Matlab

Intellectual 380 points

Replies: 3

Views: 359

Part Number: TMS320F28379D

Tool/software: Code Composer Studio

Hi,

Could you please tell me from which version on wards of Matlab + CCS does the TMS320F28379D get autocode support.
I have 2016b Matlab and CCS 5, but was unable to locate TMS320F28379D in the device list (in configurations).

Thank you,

Devinda.

  • Hello Devinda,

    F2837xD support started in MathWorks Release R2015b. That initial support didn't have a drop down selection for F28379D devices. We added the drop down selection for F28379D devices in Release R2016a.

    So your MathWorks version (R2016b) should be fine. However, I don't believe CCSv5 supports F28379D - I think you may need CCSv6 at a minimum.

    Cheers,

    -Brian

    Brian McKay  |  Technical Marketing  |  www.mathworks.com

  • Guru 155420 points

    In reply to Brian McKay:

    Devinda,

    Brian is correct; native support for the F28379D devices came with CCSv6.

    To make CCSv5.5 work with this device, there is a sequence of instructions required.
    e2e.ti.com/.../1150959

    All that said, is there a strong reason why you are still using CCSv5? CCSv6, 7 and 8 can also be used without cost.

    processors.wiki.ti.com/.../Download_CCS

    Hope this helps,
    Rafael

    If my reply answers your question please click on the green button "This resolved my issue".

    Useful pages: Find bugs: New system (SIR), Old system (SDOWP), www.ti.com/jtag, Projects and Build, Debug, Download CCS
  • In reply to desouza:

    Dear Brian and Rafael,
    Thank you for your reply. I switched to CCSv6, and now I can see the device in the drop down menu.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.