Compiler: IPD obtention

A GIR

Genius 3615 points

Other Parts Discussed in Thread: CONTROLSUITE

Tool/software: TI C/C++ Compiler

Hello

In order to obtain the IPD algorithm, I need to contact an FAE.

How obtain an FAE?

Thank

over 6 years ago

0 George Mock over 6 years ago

TI__Guru**** 249260 points

I cannot help with your question. Please tell me which TI processor family you plan to use. Based on that, I'll redirect this thread to the best forum.

Thanks and regards,

-George

0 A GIR over 6 years ago in reply to George Mock

Genius 3615 points

Hello

Sorry for the lake of this important information!

I'm using a F28377S processor
Thanks

0 ChrisClearman over 6 years ago in reply to A GIR

TI__Guru** 119400 points

We are no longer releasing the IPD library. Sorry for the confusion.

0 A GIR over 6 years ago in reply to ChrisClearman

Genius 3615 points

Hello
Why this is stopped?

In the last ControlSuite v3.4.9 in the HVPM_Enhanced_Sensorless_2803x there are some reference to this library which seems very interesting for us.
Then, could we obtain the last one generated on the F28337?

Without this, how do you solve the problem to start and onlow speed position of the motor with the eSMO library ?

0 ChrisClearman over 6 years ago in reply to A GIR

TI__Guru** 119400 points

The IPD library only works with extremely high saliency motors, and even then is very challenging to get working.
We do not want to offer this because the customer experience is typically poor and difficult to support (or we don't support at all, which leaves customers frustrated).

We leave start-up under heavy load and low speed control challenges up to motor control experts to add as their own contribution.

0 A GIR over 6 years ago in reply to ChrisClearman

Genius 3615 points

Ok
Thank,

C2000™︎ microcontrollers

C2000 microcontrollers forum

Compiler: IPD obtention