CCS/TIEVM-HV-1PH-DCAC: Study on Inverter PID Control

Lewis Kevin

Part Number: TIEVM-HV-1PH-DCAC
Other Parts Discussed in Thread: C2000WARE-DIGITALPOWER-SDK

Tool/software: Code Composer Studio

Hello.
have always had a lot of help

After purchasing a TIEVM-HV-1PH-DCAC demo board, the source code is analyzed. It is an old source code method, and the analysis is very difficult.

Do you have an easy example source code for inverter PID control?
It doesn't matter if it's not related to the demo board.

If you don't have an example source code, please advise me how to study.

Thank you.

over 5 years ago

0 Manish Bhardwaj over 5 years ago

TI__Mastermind 43730 points

I am not sure what you mean " it's old source code method" ?

The code is released in C2000ware-digitalpower-sdk,

documented in the UG www.ti.com/.../TIDM-HV-1PH-DCAC

0 Lewis Kevin over 5 years ago in reply to Manish Bhardwaj

Intellectual 500 points

I am not sure what you mean "it's old source code method"?
This means that it is different from the F28 Reference Manual and the example source code.
Below is how the sample code shows you.

So I asked if there was an example that was easier than the source code provided by TIEVM-HV-1PH-DCAC.

My goal is to learn the PID control of inverter.

Thank you.

0 Manish Bhardwaj over 5 years ago in reply to Lewis Kevin

TI__Mastermind 43730 points

Unfortunately, the TID code is the "new way" and the manual is a little bit outdated from a SW quality perspective, though technically accurate.

-Manish

0 Lewis Kevin over 5 years ago in reply to Manish Bhardwaj

Intellectual 500 points

Thank you for your reply.
I'll study more and ask you a question when I have something I don't know.
Thank you again for always helping me.

C2000™︎ microcontrollers

C2000 microcontrollers forum

CCS/TIEVM-HV-1PH-DCAC: Study on Inverter PID Control