Hi ,
This is Prithvi , i am relatively new to TMS320F28335, i have worked out a code for three phase PWM for my inverter and as a next step i would like to do the closed loop of my inverter by controlling my PWM pulse by implementing a PI control loop in the Code . I have gone through some of the threads in this forum but i did not understand those threads .
Can anyone please help/ guide me on how to do the PI control loop ?
Kind regards ,
Prithvi
Well, that is weird.
I suggest you to try doing this. Right click on the project in the project explorer, navigate to 'Build Configurations' and then to 'Set Active' and then to 'F2833x_RAM'. This should let you build. There might be couple of warnings, either you can ignore or comment out that lines of code issuing warnings.
In any case, if you are not familiar with PI controller, this whole project is probably even more complex for a beginner. These example projects can be useful for those having some level of familiarity with power electronics, motor control and embedded programming. I recommend you to spend some to understand the topics better. We may not be able to provide anymore pointers than what is available on web.
