Other Parts Discussed in Thread: C2000WARE
Dear TI Experts,
My question is related to the kit of Single-Phase Inverter Reference Design With Voltage Source and Grid Connected Modes with part No. TIDM-HV-1PH-DCAC.
I found that there are two options for filter capacitor sensing:
1. The default is sensing capacitor current;
2. And it also gives the possibility to sense the voltage of the cap.
In my project, the voltage of the capacitor is preferred. Would you please let me know what kind of modification I should make in terms of hardware and software. Many thanks in advance.
with kind regards,
Yu