This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

LAUNCHXL-F28069M: tidu986 PowerSUITE

Prodigy 90 points

Replies: 8

Views: 272

Part Number: LAUNCHXL-F28069M

Hello!

On the mentioned app note (tidu986), I'm aware that controlSUITE and powerSUITE have been updated since then.

It is possible to access the same project thru the new CCS (v9.1.0.00010 )? I just want to use Solution Adapter for other(?) DSP and power requirements, but this solution adapter has not Buck converter on it.

Thank you for your time.

  • The old resource explorer is not supported in new CCS hence you cannot go to through the resource explorer.

    You should be able to directly import the project  by Project-> Import CCS project -> and browsing to 

    C:\ti\controlSUITE\development_kits\BOOSTXL_BUCKCONV\v1_01_00_00\Buck_VMC_F28069M

  • In reply to Manish Bhardwaj:

    Thank you for your response; I did as you suggested and I was expecting to see in this supported kit on power SUITE (sofware>C2000Ware_DigitalPower_SDKPowrSUITE) as originally described in tidu986.

    There is a way to add it directly (even manually)? I need to utilize that application and modify it in Solution Adapter, SFRA, and Comp Designer.

    Am I doing something wrong?

    Thank you again! 

  • In reply to user6101930:

    You should be able to import the same project through

    ou should be able to directly import the project  by Project-> Import CCS project -> and browsing to 

    C:\ti\controlSUITE\development_kits\BOOSTXL_BUCKCONV\v1_01_00_00\Buck_VMC_F28069M

    You will get the GUI with the above steps as well, it is simply an alternative to importing projects from resource explorer. 

  • In reply to Manish Bhardwaj:

    Seems that I did right the first time, and I get the code and all the corresponding libraries.

    Now, to modify it I have to change the code, but if I want to do adapted it dynamically as the below picture or use the Comp designer and SFRA which are the steps to call this GUI?

    Thank you for your patience and support.

  • In reply to user6101930:

    Can you give a snapshot of the project imported from the project explorer once you have imported it? 

    You should have a CFG page there that you can double click to open it. 

    -Manish 

  • In reply to Manish Bhardwaj:

    Thank you for your reply, I took a sequence of screenshots in order to see what I'm doing wrong.

    In the last image, there is no GUI for the related step-down application.

    Again, thank you for your support!

  • In reply to user6101930:

    The solution adapter is part of the project itself,

    Please double click on main.cfg file and it should open the powerSUITE solution adapter page for you.

    -Manish

  • In reply to Manish Bhardwaj:

    Did you make progress on this?

    -Manish

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.