TMDSCNCD28388D: Can we use TMDSCNCD28388D control card to replace TMDSCNCD28379D in the Motor Control Development Kit TMDXIDDK379D?

Minghui Lu

Part Number: TMDSCNCD28388D
Other Parts Discussed in Thread: TMDSCNCD28379D, TMDXIDDK379D

Hello,

I am a researcher from university.

As the subject, can we use TMDSCNCD28388D control card to replace TMDSCNCD28379D in the Motor Control Development Kit TMDXIDDK379D?

I see both of them have 180 pins.

http://www.ti.com/tool/TMDSCNCD28379D

https://www.ti.com/tool/TMDSCNCD28388D

http://www.ti.com/tool/TMDXIDDK379D

Thanks,

over 4 years ago

0 Ramesh Ramamoorthy over 4 years ago

TI__Mastermind 27240 points

Yes, absolutely.

0 Minghui Lu over 4 years ago in reply to Ramesh Ramamoorthy

Prodigy 20 points

Hi Ramesh,

Thanks for your reply.

Recently, we are searching for solutions to Ethernet communication between multiple TMDXIDDK379D ( http://www.ti.com/tool/TMDXIDDK379D

Do you know when this new control card will be sold more widely and available from vendors such as Mouser/Digikey? Because it seems that people can only buy one at one time on the official website.

Thanks,

0 Cody Watkins over 4 years ago in reply to Minghui Lu

TI__Mastermind 41415 points

Minghui,

this MCU is still in "preview". After it is fully released we will remove the 1u order restriction from related EVMs (like TMDSCNCD28388D). At the same time we allow distributors such as Mouser and Digikey to stock it.

For now if you need more than one you will need to place multiple orders.

Regards,
Cody

C2000™︎ microcontrollers

C2000 microcontrollers forum

TMDSCNCD28388D: Can we use TMDSCNCD28388D control card to replace TMDSCNCD28379D in the Motor Control Development Kit TMDXIDDK379D?