This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TMDSDOCK28027: TMS320F28027 Experimenter Kit - Does it feature the programming of external TMS320F28x placed in a different standalone board

Prodigy 75 points

Replies: 2

Views: 115

Part Number: TMDSDOCK28027

Hi all,

I have the following needs:

- developing code and debugging it for generating some PWM signal from a TMS320F28x microncontroller

- after code development, copying such a developed code to a TMS320F28x I have placed in a prototype board, where I have only access to 14-pin JTAG header connected to the internal MCU.

It is my understanding that I could use the TMS320F28027 Experimenter Kit for code developement and debug, but it is not clear wheter I can use the "On-board XDS100v1 JTAG debug probe" integrated in the Docking statition to program an external TMS320F28x I would place in my standalone prototype .

thank you for your support

Sebastiano

  • Sebastiano,

     you need to have your PC communicate to a debug probe, that debug probe will then need to connect to the device you are trying to program. How you do that does not matter. External debug probes are offered in the 14 pin connector that you have mentioned. For example: http://www.ti.com/tool/TMDSEMU110-U

    If you wish you could adapt the embedded debug probe found in the docking station, and that will work. I suspect that this would take more effort than it is worth, and would suggest you to just buy an external emulator.

    Regards,
    Cody

  • In reply to Cody Watkins:

    Thank you!

    I will take the XDS110 debug probe

    Regards,

    Sebastiano

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.