This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMDSCNCD280049C: How is F280049 control card connected to the old kit?

Part Number: TMDSCNCD280049C
Other Parts Discussed in Thread: TMDSHVMTRINSPIN, , C2000WARE

Hi team,

My customer would like to test F28004x instaspin with tmdshvmtrinspin kit. However, the docking on the board does not fit the F28004x control card. Is there part to bridge the F280049c control card on our old evaluation kits? I did not find anything.

Regards,

Brian

  • Brian,

    please see the controlCARD user's guide.

    TMDSADAPT180TO100 has been designed for this purpose. You will need to verify that the pins available from the F280049C device will support tmdshvmtrinspin. The pin out for this controlCARD, when used with TMDSADAPT180TO100, has been included in C2000Ware here: "C:\ti\c2000\C2000Ware_2_00_00_03\boards\controlCARDs\TMDSCNCD280049C\A\TMDSCNCD28004x_RevA_100DIM_map.pdf"

    Regards,
    Cody