Circuit diagram for F28035 Flashing LED

sofiane Fahas

Other Parts Discussed in Thread: CONTROLSUITE

Hello to community,

i'm trying to found a circuit diagram simple for test the exemple flashing LED that we could found in the Control suite, but i didn't found the circuit diagram for that,
there is one, who could help me please,

best regards

over 11 years ago

0 Gautam Iyer over 11 years ago

Guru 192875 points

Hi Sofiane,

GPIO 31 and 34 are connected to LEDs here; check this out:

F2803xcontrolCARD-SCH[R1.2].pdf

Regards,

Gautam

0 sofiane Fahas over 11 years ago in reply to Gautam Iyer

Intellectual 280 points

Hello Gautam,

think you so much,
tour responses are always very helpful,

Regards,

Sofiane

0 Gautam Iyer over 11 years ago in reply to sofiane Fahas

Guru 192875 points

You're Welcome! Please close the thread if you've received the answer.

Regards,
Gautam

0 sofiane Fahas over 11 years ago in reply to Gautam Iyer

Intellectual 280 points

hello Gautam,

thank you for the answers, but after reviewed the document that you asked about, it is concerning he internal flash LED in the Microcontroller, and not for the exercise scheme that we found in the Control suite,

regards,

Sofiane

0 Gautam Iyer over 11 years ago in reply to sofiane Fahas

Guru 192875 points

If this is the project you're referring to:
C:\ti\controlSUITE\device_support\f2803x\v128\DSP2803x_examples_ccsv5\timed_led_blink

You just have to shift the LED connection from GPIO (in the above schematic) to GPIO34. That's all :)

Regards,
Gautam

0 sofiane Fahas over 11 years ago in reply to Gautam Iyer

Intellectual 280 points

It is works, huraaaaaaaaaa,

thank you so much,

Regards,

Sofiane

0 Gautam Iyer over 11 years ago in reply to sofiane Fahas

Guru 192875 points

That's Great! Please close the thread by verifying the answer.

Goodluck & Regards,
Gautam

C2000™︎ microcontrollers

C2000 microcontrollers forum

Circuit diagram for F28035 Flashing LED