• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 82 subscribers
  • Views 555 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

InstSpin GUI - user.h

Timothy Luca
Intellectual 790 points
Other Parts Discussed in Thread: INSTASPINUNIVERSALGUI, MOTORWARE

I'm having trouble loading user.h on the first page of the gui. I always get the default motor parameters rather than the ones I've saved in the user.h files. Any thoughts as to what I could be doing wrong?

  • 0
    TI__Guru** 119670 points

    per the QSG

    To save your own motor parameters you will need to update the user.h file, recompile, and copy the .out to \appProgram.out

    Note: Re-compiling of this project will be offered shortly in a future revision

    　

    However, we are NOT offering this option any longer.  We instead released INSTASPINUNIVERSALGUI which allows instrumentation of ANY MotorWare lab.