Tool/software: Code Composer Studio
Hi
here I m trying to read input signal in n2het1_20. output is GIOB_2(on/off)
unlike gioGetbit(); in het.h no such function is there. How can I read a particular single pin high or low in n2het.Can u please guide me.
thanks
regards
Rock
Hi Rock,
The N2HET pins that are not driven by the N2HET output pin actions can still be used as normal GIO pins.
You can use hetPORT1 to access the those GIO registers:
For example:
gioSetPort(hetPORT1, gioGetPort(hetPORT1) ^ 0x00000001); --> to set N2HET1[0] to HIGH
gioGetBit(hetPORT1, 0x01); --> to read the value of N2HET1[1]
