RM57L843: Configuring SEGGER JLINK DEBUGGER

Aditya Natu

Intellectual 320 points

Part Number: RM57L843
Other Parts Discussed in Thread: SEGGER

Hi Team,

We have a RM57L843 custom board and SEGGER Jink debugger.

In CCS Version: 10.1.0.00010 we havent found connection option for Jlink debugger.

Please help how to configure Jlink debugger in CCS 10 for RM57L843.

Thanks,

Aditya Natu

over 3 years ago

0 Chester Gillon over 3 years ago

Guru 92251 points

In CCS Version: 10.1.0.00010 we havent found connection option for Jlink debugger.

Maybe Segger J-Link support wasn't selected when CCS 10 was installed.

If you re-run the CCS 10 installer and select the original installation directory you should then be able to select to installed Segger J-Link support:

0 QJ Wang over 3 years ago in reply to Chester Gillon

TI__Guru**** 186206 points

After Segger Jlink driver is installed, you can use it in CCS project:

Arm-based microcontrollers

Arm-based microcontrollers forum

RM57L843: Configuring SEGGER JLINK DEBUGGER