This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430F149: MSP430F149

Part Number: MSP430F149

I have a production issue with an MSP430F1. An output port is connected to a 10K pull down and  and to  the base of a MMBT3904 NPN transistor.  Is the 1M resistor too large? 

Another port pin is connected to a 100K Ohm resistor and then to the gate of a ZVN3320, and the gate of a 2N7002 (N-channel Mosfets)

These gates control a discrete H-bridge that is experiencing shoot-through failures. I didn't design this circuit. Any help would be appreciated.

**Attention** This is a public forum