MSP430FR5994: MSP430FR5994

mor ge

Prodigy 110 points

Part Number: MSP430FR5994

hi,

There is a problem with the new version of msp430fr5994.h header file.

I understand there is a problem with the newer version of header file in driverlib source.

I can't read pin value of port 3 or higher port because the definitions of ports has been removed in header file.

Can you send me an older version of header file msp430fr5994.h (fix version) to mail.

If possible, explain to me how to fix the problem.

thanks.

over 2 years ago

0 Bruce McKenney47378 over 2 years ago

Guru 88490 points

The original report is over here, including some diffs you can probably use to patch your .h file::

https://e2e.ti.com/support/tools/code-composer-studio-group/ccs/f/code-composer-studio-forum/945082/ccs-msp430fr59941-uart-interrupt-not-triggered-on-msp430fr5994-1-when-code-is-flashed-with-ccs10/3491228?tisearch=e2e-sitesearch&keymatch=__MSP430_HAS_PORTJ_R__#3491228

I seem to recall a CCS update was expected a few months ago, so it might be as simple as "Help->Check For Updates". (I don't have CCSv10, so I can't try it myself.)

0 JD Crutchfield over 2 years ago

TI__Mastermind 26420 points

Bruce is correct. There was an unintentional issue with some header files with a past release that were found and reverted. Looking at our tracker for the issue, it was fixed in closed in 4Q. Can you check for updates on your side?

I'm installing several updates on my workspace actually, but I'll try and double check that I see the fix on my side later today.

Thanks,

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR5994: MSP430FR5994