Hi Team,
We would like to confirm if the connections between MSP-FET430UIF and MSP430G2553 in the attached excel file are correct?
MSP-FET430UIF JTAG connection to MSP430G2553.xlsx
Regards,
Danilo
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
We would like to confirm if the connections between MSP-FET430UIF and MSP430G2553 in the attached excel file are correct?
MSP-FET430UIF JTAG connection to MSP430G2553.xlsx
Regards,
Danilo
Hello Danilo,
For the most up to date recommendation for connecting MSP devices via 4-wire JTAG or 2-wire SBW programming interfaces, please see the MSP HW Tool's User Guide, Section 2. In particular, look at Figure 2-1 for 4-wire JTAG, and for MSP430G2553, look at Figure 2-2 if utilizing the 2-wire SBW connection.
Also, I would like to point out that the MSP-FET430UIF has been obsolete for some time. Although it does support the MSP430G2553, it may not support the latest versions of CCS and IAR. I recommend getting the latest MSP debugger the MSP-FET.
Hi Jace,
Thank you very much for your response and recommendation. We will advise the customer accordingly.
Regards,
Danilo
**Attention** This is a public forum