EVM430-FR6047: Use the USSLib with TI-RTOS

Simon Gosset

Part Number: EVM430-FR6047

Hi,

I am wondering if it's possible to add USSLib to a TI-RTOS project with this EVM. How to import USSLib in an already existing TI-RTOS project ?

Best regards,

Simon.

over 2 years ago

0 Eddie LaCost over 2 years ago

TI__Mastermind 38590 points

Hi Simon,

We do not have any example using USSLib with any RTOS. There is some information on adding wolfSSL library with TI-RTOS which may be a helpful starting point.

https://processors.wiki.ti.com/index.php/Using_wolfSSL_with_TI-RTOS

0 Simon Gosset over 2 years ago in reply to Eddie LaCost

Intellectual 315 points

Ok i'll look into it. But for you, is it possible to use USSLib with TI-RTOS ?

0 Eddie LaCost over 2 years ago in reply to Simon Gosset

TI__Mastermind 38590 points

Simon,

It should be possible, but it is not something we support in our example package.

https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/928550/msp430fr6047-ti-rtos

0 Simon Gosset over 2 years ago in reply to Eddie LaCost

Intellectual 315 points

Ok thank you. I will look into it.

Thank you.

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

EVM430-FR6047: Use the USSLib with TI-RTOS