Bought some msp-fet microcontrollers and 2 of them stopped working after a couple of uses.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Bought some msp-fet microcontrollers and 2 of them stopped working after a couple of uses.
Hi Jesus,
Could you provide more details about your issue?
The MSP-FET can't work normally? Don't download firmware?
Thanks!
Best Regards
Johnson
The MSP-FET are dead, there is no power or mode light on when connecting through USB. The devices are neither recognized/communicating with the interface.
I am currently using other unit with the same configuration and is working fine.
Hi Jesus,
I think you can try to change a UCB cable to test again, if still bad. Maybe thosr MSP-FET is broke.
Thanks!
Best Regrads
Johnson
I tried different USB cables and still didn't work. Other MSP-FET work fine, it is just these 2 that have problems.
Hi Jesus,
It seems these 2 FET are broke, you can contact after-sales service.
Thanks!
Best Regards
Johnson
**Attention** This is a public forum