This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR6970

Other Parts Discussed in Thread: DRV8704, MSP430FR6970

Hello all,

      We are using MSP430FR6970 controller and DRV8704 driver, we have some doubt about the microcontroller I/Os,

1.Can we use the LCD pins to GPIO pins(R33/LCDCAP)PIN NO 6,how to use 

2.DRV8704 we are not using any spi configuration, we are using only I/Os for control the actuator, the driver shows fault most of the time.

Please clarify this two points me.

Thanks.

  

**Attention** This is a public forum