MSP430FR5969: Cellular modem driver

Adrian M

Part Number: MSP430FR5969

Hi,
im looking for cellular modem driver for ti-rtos, i need tcp/ip + sms, but i dont find nothing special, should i implement driver?

0 Leonardo Estevez over 2 years ago

Hi Adrian,

This thread discusses some GSM modules which have been interfaced to our MSP via a UART AT Command set:

Often times, the cellular module will run the stack for data communication. I would recommend using an MSP432E device if you need a TCP/IP stack.

BR,
Leo

0 Adrian M over 2 years ago in reply to Leonardo Estevez

+1 Leonardo Estevez over 2 years ago in reply to Adrian M

Hi Adrian,

I suppose that should be possible since freertos should be ported to the FR5969:

BR,
Leo

0 Adrian M over 2 years ago in reply to Leonardo Estevez

ok i will try ;]

0 Adrian M over 2 years ago

NDK works at msp430? And can i just join my tcp/ip commands?(Still in work)

0 Leonardo Estevez over 2 years ago in reply to Adrian M

Hi Adrian,

I don't know if this will work without modification.

BR,
Leo

0 Adrian M over 2 years ago in reply to Leonardo Estevez

You talking about NDK version for msp430? Or joining my tcp/ip?

+1 Leonardo Estevez over 2 years ago in reply to Adrian M

Hi Adrian,

I don't know it the NDK will work without modification. I'm assuming that you'll be able to port your tcp/ip code once the device layer is working.

BR,
Leo

0 Adrian M over 2 years ago in reply to Leonardo Estevez

ok, time to try

**Attention** This is a public forum

MSP low-power microcontroller forum