MSP430FR6043: Technical issues

Zhonghui Xu

Part Number: MSP430FR6043
Other Parts Discussed in Thread: EVM430-FR6043, MSP-FET

Hi team,

I got a question from customer.

I have the EVM msp430fr6043 development board. Can I upload a program from the jtag port to the card I designed with the msp430fr6043 microcontroller using this board?

Can I use my evm430fr6043 development card to install programs on my own card?

Thank you very much for your help.

Best regards,

over 2 years ago

0 Cash Hao11 over 2 years ago

TI__Mastermind 27675 points

You can use JTAG or SBW interface to program the EVM430-FR6043 board.

I am not understanding the rest of the question. What is the "card" you are referring in this thread?

Best regrads,

Cash Hao

0 Zhonghui Xu over 2 years ago in reply to Cash Hao11

TI__Expert 5445 points

Hi Hao,

Thank you for your reply.

Whether I can use my evm430fr6043 development board to install programs on the board I designed?

Best regards,

0 Cash Hao11 over 2 years ago in reply to Zhonghui Xu

TI__Mastermind 27675 points

Hi,

Yes, you can. The right side of the EVM board is an ez-FET. The ez-FEt can be used for debugging and downloading.

Best regards,

Cash Hao

0 Zhonghui Xu over 2 years ago in reply to Cash Hao11

TI__Expert 5445 points

Hi Hao,

Thank you for your help.

Best regards,

0 Zhonghui Xu over 2 years ago in reply to Cash Hao11

TI__Expert 5445 points

Hi Hao,

Thank you for your help.

I can use it to load the circuit I designed, right? did i understand correctly?

Best regards,

0 Cash Hao11 over 2 years ago in reply to Zhonghui Xu

TI__Mastermind 27675 points

Hi,

Yes, you can. The ez-FET has similar function as the MSP-FET. You can use both of them to program your board.

Best regards,

Cash Hao

0 Zhonghui Xu over 2 years ago in reply to Cash Hao11

TI__Expert 5445 points

Hi Hao,

Thank you so much.

Best regards,

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR6043: Technical issues