MSP430-SMBUS: Error in application note

Hi,

Page35 is the schematic of 40V input circuit. It may depends on your input power. I will help to transfer this to DC/DC team to give you some comment of the power part. 

Awaiting response from power team.

HI

pls follow page 35 schematic, as it is a negative feedback system, so the reference should be at positive input of opamp, and the current or voltage signal should be at negative input side

tHANKS FOR THE CLARIFICATION Daniel Li14. I hope they change the circuit on page 9, as that can be misleading.

I have designed a charger around the same architecture (SLAA476B) but with a different controller IC. Can you please review my charger design? It will be very helpful.

Daniel Li14 can you please review my design.

HI 

I can help of TPS40057 part, for MCU part, you may still need to help from our MCU team.

Thanks

Thanks Daniel Li14 Can you please accept my connection request so that I can send you files privately for review.

Maybe Allen Gao can help in reviewing the MSP430 part of my design.