This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430F6736A: Displaying wrong AC voltage if it exceeds 275 VAC

Part Number: MSP430F6736A

Hi TI Team,

I am using 24 Bit ADC module to read the VAC. Code is generated by TI EMDC library. It has been observed that when voltage exceeds 275 VAC, MSP is showing around 230 VAC. I have removed the varistors from the board but the problem persists. Can you pls confirm whether it is an EMDC library bug or something else.



**Attention** This is a public forum