• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 78 subscribers
  • Views 151 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

CCSV5.2 for linux and msp430 launchpad, is debug supposed to work?

MSP430G2553: 1304042463

Antônio Frasson
Prodigy 10 points
Part Number: MSP430G2553

For Debug on linux, inside the directory where the file.out file is, I do;

path to the directory where the CCS is installed/ti/ccs1100/ccs/ccs_base/DebugServer/bin/mspdebug rf2500 "prog file.out"

  • +1
    TI__Guru 60181 points

    Hi Antonio,

    The output file is normally in your project directory under a CCS workspace.  What directory is your project located in?

  • 0 in reply to Dennis Lehman
    TI__Guru 60181 points

    Hello Antonio,

    It's been a few days since I have heard from you so I’m assuming your question has been answered.
    If this isn’t the case, please click the "This did NOT resolve my issue" button and reply to this thread with more information.
    If this thread locks, please click the "Ask a related question" button and in the new thread describe the current status of your issue and any additional details you may have to assist us in helping to solve your issues.

**Attention** This is a public forum