MSP432E411Y-BGAEVM：About I / F cable between the evaluation board and PC

Hi Nakamura,

I think this should just a Micro USB 2.0 cable. Any problem here?

Thanks!

Best Regards

Johnson

Thank you for your quick response.

I would like to confirm it additionally.
Which type is it? (type A or B?)
Also, does this have to support OTG?

Here's what I want to do:
- Power supply to the evaluation board
- ROM writing to the microcomputer and debugging

Specifically, can it be used with the following products?

https://www.amazon.co.jp/Micro-USB-OTG%E3%82%B1%E3%83%BC%E3%83%96%E3%83%AB-CableCreation-OTG%E3%83%A2%E3%83%90%E3%82%A4%E3%83%AB%E3%83%87%E3%83%90%E3%82%A4%E3%82%B9%E3%82%A2%E3%83%80%E3%83%97%E3%82%BF/dp/B0744BW2B2?SubscriptionId=AKIAJ6XSBTKVSYU7G72Q&tag=lifehacker18-22&linkCode=xm2&camp=2025&creative=165953&creativeASIN=B0744BW2B2&ref=mgac2017&th=1

Best Regards

Nakamura

Hi Nakamura,

MSP432E401 support OTG function. The Lanuchpad is used USB micro B connector.

If you would like use MSP432 as the host(enable OTG function), you need use OTG cable to connect other device.

If you just for power supply and download firmware, general USB micro B is enough.

Thanks!

Best Regards

Johnson