MSP430G2232: GUI Composer writing to the target using Standalone App

Yasir Manzoor

Part Number: MSP430G2232
Other Parts Discussed in Thread: MSP430G2352

Hello.

I am trying to interface GUI Composer with my custom board which has MSP430G2232 on it. I am using SWD (SBWTDIO and SBWTCK) from the launchpad to communicate with my custom board. I am new to GUI composer and having problems in binding my variables. My aim is to make a simple GUI using which i can modify variables for I2C from the standalone app/browser. Some help would be appreciated

Best regards,

Yasir

over 2 years ago

0 Cash Hao11 over 2 years ago

TI__Mastermind 27635 points

Hi Yasir,

There is a GUI Composer user's guide you can start with.

https://dev.ti.com/gc/v2/help/GC_UserGuide_v2/index.html

Best regards,

Cash Hao

0 Yasir Manzoor over 2 years ago in reply to Cash Hao11

Prodigy 10 points

Hello Cash,

I read the User Guide that you posted. I don't know why but some links are missing in the user Guide. I made a very simple window application to upload code in my board. I used a Connect/Disconnect button and a File menu button, both inside a Container. My Standalone app isn't detecting any hardware even though it's connected. But if I click on Program Device from File menu, Program gets uploaded on the target, but stops as soon as the status bar reaches 100%. I am attaching the Images below. Please help me out.

Thanks,

Yasir

. It says Hardware Not Connected