MSP430F2471: RTOS application concept

Mark Steve

Part Number: MSP430F2471

Hi,
I want to use rtos in my application. The application is to read 50 analog sensors from ADCs for every 1 minute and store the data in flash memory. Later, the data has to be sent to a bluetooth device over UART.

How this can be done using rtos? Can any one frame an idea using rtos concept

Thanks and Regards,
Mark steve

over 2 years ago

0 Keith Barkley over 2 years ago

Guru 35580 points

Set up a task to do it. However, I don't see anything here that cries out for RTOS, Interrupts and Timers should be sufficient.

0 Xiaodong LI over 2 years ago

TI__Mastermind 20005 points

I think there is no necessary to using RTOS on this application. Please consider using simply timer and interrupt MCU resources.

Thanks

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430F2471: RTOS application concept