Other Parts Discussed in Thread: MSP-FET,
I am working on MSP430f5507, currently, I am developing my application using CCS software, MSP-FET for the hardware connection. Now I am reading about the MSP430-BSL and would like to use BSL-scripter, my questions are as the following:
1. where can I find the CCS BSL source code for the MSP430f5507, actually I have downloaded the CCS_BSL_source from the TI website but when I extracted the files I did not find the CCS source code for the microcontroller I work on (MSP430f5507)!!!!
2. in the CCS_BSL_source file that I have downloaded, there is a released BSL image for MSP430F55xx, can I use MSP-FET to burn this image into the controller, because I think that the factory default code stored in the BSL section is for USB not for UART?
3. in the project I work on, the microcontroller is connected with a wireless device through the UART's TX and RX pins, can I use this wireless device and the BSL in the controller to send the image firmware and program the controller wirelessly, what I mean is; can I remap the pins used for BSL (which are P1.1 and P1.2) to be P4.5/RXD and P4.4/TXD??
I appreciate your support and any recommendations related you would provide.
Thanks in advance...