• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 78 subscribers
  • Views 155 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

MSP430FR2633: Captivate design center GUI-UART interface with the device for tuning

MSP430FR2633: Uart Comm with Captivate Design Center

Okan ERCAN
Prodigy 10 points
Part Number: MSP430FR2633
Other Parts Discussed in Thread: MSP-FET,

Hi, 

    I designed my own board with MSP430FR2633. I use MSP-FET Flash Emulation Tool. This tool has programming pins and uart interface to communicate with uC. Is it possible to use the programmer's USB - UART comm interface to tune sensor in Captive Design Center. Thank you.

Okan,


**Attention** This is a public forum