Hello,
The ADC-related values can be read from the TLV in order to improve ADC accuracy.
Are these parameters available for the MSP430FR2100, too? If I look at the data sheet, it seems not.
Thanks!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
The ADC-related values can be read from the TLV in order to improve ADC accuracy.
Are these parameters available for the MSP430FR2100, too? If I look at the data sheet, it seems not.
Thanks!
Hi Umberto,
It's a good question. I'm working with my team to clear up the confusion. I'll get back to you soon.
Evan
Umberto,
I confirmed with my team that Table 9-37 also applies to MSP430FR2100 despite the column header "MSP430FR211x". We will work to update the datasheet to make it more clear.
Thanks,
Evan
**Attention** This is a public forum