This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430G2553: Flashing hex via UART

Part Number: MSP430G2553
Other Parts Discussed in Thread: ENERGIA, UNIFLASH, MSP430-FLASHER

Hi Guys,

Our customer is using a MSP430G2553 MCU in their design. They have created an application with Energia IDE and tested it on a launchpad using the same MCU.

The firmware file created by Energia IDE is in hex format and they need to know if there is any application that runs on Window 10 PC and can upload and flash this firmware to their end product using the onboard BSL over the UART interface.

Thank you for your help in advance.

Best regards,


**Attention** This is a public forum