This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

EVM430-FR6043: EVM430-FR6043

Part Number: EVM430-FR6043

Dear TI,

Please provide your assist to enable 5V LDO on board EVM430-FR6043 to excite ultrasonic transducers at 5V.

I have done,

1. JP1 ON

2. JP2 switched to |5VTx|

But still unable to get 5V at JP4 which is VCC_TX.

There may be a logic enable 5VTXEN in source code but I didn't find out that.

Thank you!



**Attention** This is a public forum