• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 79 subscribers
  • Views 229 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR5949: debug_error

Siv M
Prodigy 90 points

Part Number: MSP430FR5949

Hello,

I receiving a error message while debugging the code that "Break at address "0x9a000" with no debug information available, or outside of program code".

I don't know why it appears. Valuable answer will help me to resolve this.

  • 0
    TI__Genius 10060 points

    Hi Siv M,

    If you don't have the device connected to the debugger does the program still function correctly? If so, it is likely that there is some issue with the debugger. I would review the device errata to see if there are any EEM (debug) errata that apply.

    Thanks,

    Evan

**Attention** This is a public forum