This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIDM-NFC-READER: The board is not getting connected with GUI to program patch PCB



TIDM-NFC-READER is not getting connected to GUI.

I made this board from third party manufacturer with the Gerber data available on web

Then I uploaded the code TRF7970AEVM (1).zip

I want to Program the Patch PCB with RF430. could not do it.

Best Regards,

Ashish jain

**Attention** This is a public forum