• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 78 subscribers
  • Views 123 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FG6626: MSP430FG6626 FW Read

Jonathan Chavarria
Prodigy 10 points
Part Number: MSP430FG6626
Other Parts Discussed in Thread: MSP-GANG,

Is there a combination of HW and SW provided by TI to extract the Firmware from a device using an MSP430FG6626 through a JTAG port besides the legacy MSP-GANG programmer? 

I was recommended to use a MSP Flasher but this particular device is not supported by MSP Flasher. 

Thanks in advance.

-Jonathan Chavarria

  • 0
    TI__Guru 56685 points

    Hello Jonathan,

    The MSPFlasher SW's support of device is dependent on the MSP Debug Stack it pulls in. The latest one associated with it should include support for MSP430FG6626. That being said, we are no longer maintaining MSPFlasher. Its recommend to use UnifLsah instead. You can certainly pull FW with that tool and you can do it from CCS as well. 

  • 0 in reply to Jace H
    Prodigy 10 points

    Hello Jace, thanks for your help, I will try this and reply here. I will be using MSP-GANG programmer as HW interface.

**Attention** This is a public forum