Other Parts Discussed in Thread: MSP430F5529, MSP430WARE
Hi,
I took over a very old MSP430F5529 project that uses the USB interface. I can compile the project but linking spits out a ton of errors mostly regarding USB as shown below. I am using the lasted code composer and I think I need to download an add on for USB. I was looking at www.ti.com/lit/slaa457 that I found in a forum but it doesn't really explain how I install this add on (if that is actually true) or how I set up the project to support USB. Any information will be very helpful.
Thanks!!!!
John