We are developing RF wireless application using MSP-EXP430FG4618.
Memory(RAM/ROM) required for the application is more than the available onchip memory.
Can you please advise how to extend the memory on this board.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
We are developing RF wireless application using MSP-EXP430FG4618.
Memory(RAM/ROM) required for the application is more than the available onchip memory.
Can you please advise how to extend the memory on this board.
No chance to extend RAM externally. Flash might be extended with an external serial flash memory and some dynamic load logic for your application.
If I were you, I'ld check the MSP430F6638 which has 256KByte flash and 16KByte RAM.
Hardy
Hi Kuldeep,
the MSP430 has no external memory interface! So, when you need more (code) memory you will have to use a different device. In case of data memory you can connect i.e. a SD-Card, data flash, EEPROM, FRAM, ... to one of your SPI or I2C interfaces.
Kind regards
aBUGSworstnightmare
**Attention** This is a public forum