Hi,
Good Day. Is MSP430FR5041 can support a Highly Magnetic Interference Environment?
If no, is there any MSP430 that can support a Highly Magnetic Interference Environment?
Please advise. Thank you very much.
Best Regards,
Ray Vincent
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
Good Day. Is MSP430FR5041 can support a Highly Magnetic Interference Environment?
If no, is there any MSP430 that can support a Highly Magnetic Interference Environment?
Please advise. Thank you very much.
Best Regards,
Ray Vincent
Hi,
I do not think the MSP430FR5041 can support a Highly Magnetic Interference Environment.
Best regards,
Cash Hao
Magnetic coupling is to low impedance loops. With coupling proportional to loop area. ICs have small loops so little coupling. Unless of course you create loops on the PCB.
The digital sections of the MCU require a lot to upset.
So as with everything, use careful design to minimize susceptibility and add mu-metal shielding if that proves insufficient.
**Attention** This is a public forum