MSP430FR2355: Connect "MSP-FET430UIF" via COM port to CCS

Hardy Zissel

Part Number: MSP430FR2355

Is it possible to connect the MSP-FET430UIF via virtual com port with CCS? In CCS there is an option "UARTConnection". But no UART can be selected.
regards
Hardy

over 1 year ago

0 Johnson He over 1 year ago

TI__Mastermind 28286 points

Hi Hardy,

The virtual com port is used for user to transmit data to PC through serial port, I think you should use a serial debug assistant instead of CCS.

Thanks!

Best Regards

Johnson

+1 Hardy Zissel over 1 year ago in reply to Johnson He

Intellectual 490 points

I am not interested in analyzing the data of the serial port. I want to develop software with CCS for a TI CPU. The hardware is in the lab. I want to use the MSP-FET430UIF from the office in the lab. I can already control the serial ports of the hardware as a virtual COM port from the office. Is this also possible with the MSP-FET430UIF?

Best Regards

0 Johnson He over 1 year ago in reply to Hardy Zissel

TI__Mastermind 28286 points

Hi Hardy,

MSP-FET430UIF don't support serial ports function.

Thanks!

Best Regards

Johnson

**Attention** This is a public forum

MSP low-power microcontrollers

MSP low-power microcontroller forum

MSP430FR2355: Connect "MSP-FET430UIF" via COM port to CCS