This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSP430FR2676: CapTIvate Design Center UART baud rate

Part Number: MSP430FR2676

Hi,

My customer wants to get CapTIvate data without using CapTIvate Design Center GUI.
He refers to below document based on the answer provided in the original thread.
https://software-dl.ti.com/msp430/msp430_public_sw/mcu/msp430/MSPWare/3_20_00_37/exports/MSPWare_3_20_00_37/captivate/docs/users_guide/html/ch_lib.html#ch_lib_communications_protocol_sensorpacket 

He has a simple question.
What is the default UART baud rate used?
The user's guide says 250kBaud, 115.2kBaud, 38.4kBaud, 19.2kBaud, and 9.6kBaud are supported. I think 250kBaud is the default, but please confirm.

Thanks and regards,
Koichiro Tashiro

**Attention** This is a public forum